Knowing about the utility of the tile leveling system empowers to learn more about it. Keenly you are eager to know more about the usage of the tile leveling system. You can do your tiling job by ordering the best tile leveling system, but before executing the process, you must go through the process to optimally use it. Even the catalog and all necessary products are arrogated in the system; still, you will be entailing a procedure on how to use them. Hence, in this article, we will discuss the necessary steps for the installation of the tiles.

1. The first step must be to make the foundation of the surface well where you will install the tiles. The concern must be to make the surface as flat as possible.
2. Use the tile adhesive in an adequate amount, which can help you to fix some tiles on the surface at the very time.
3. Use some more significant amount of adhesive on a tile with the help of a proper tool and place the tile on the surface before pressing it firmly.
4. After this, take two tile spacers, and then add them to each side of the tile. Also, ensure that the base of the tile spacer should not just below the added tile.
5. The next step is to carefully place the next tile as per the flooring spacers used by the installed tiles.
6. Considering the tile system you are using, slide the leveling wedges or clips into a hole you will discover on the top of the spacer. Be careful when you push the tiles firmly so that the tiles can stay leveled to a common height.
7. Suppose you don't know how to use the wedges or clips efficiently, then you can rely on caps. Fit the caps on the top of the spacer and rotate them until the spacers are well settled on the tiles. After the completion of this step, observe the tiles to make sure that there is no lippage.
8. After this, add more spacers and continue the same step but remember to keep an eye on the tiles even if you use caps, clips, or wedges.
9. Repeat the same process until the tiles are evenly laid, and then leave the adhesive to dry. You can also take help from the product guidelines to determine the time required by the adhesive to get dried.
10. When the adhesive gets dried now, remove the tools that are used to place the tiles properly.
11. The last step is to grout between the tiles.

If you want to try these tile leveling wedges or clips, you can refer to these products from an authentic company, "Acufloor." Vast relatable experience and innovative products for the installation of tiles are the credentials of this company. They offer various types of products, such as leveling spacers, installation pliers, bubble spacers, EZ levelers, grout line products, and many more. Moreover, these products are available at affordable rates, easy to operate, and useful in producing flat floors and walls by using floor and wall tile leveling system, respectively. To explore more about them and their products, you can visit their website https://acufloor.com/.